Interface conversion between E1 and V.35

* Support ITU-T V.35, G.703, G.704, G.823

* Standalone and chassis module available, support hot-swap

* Framed (N*64Kbps) and unframed (2.048Mbps) optional, support

continuous and discontinuous timeslots setting

* Frame mode support PCM30/ PCM31

* CRC/non-CRC auto-negotiation on E1 interface

* Support remote bandwidth control, and remote loop back under

framed mode

Specifications

Connector: DB25 female jack

DTE/DCE optional

Power

INPUT

AC Power: 100V-240V, 0.4-0.2A, 50-60 Hz

DC Power: -48V, 0.4A

Power

<2W for each standalone or module

Environment

Operation

Transport and store

P/N Description

Order Information

* Support internal clock, E1 recovery clock or V.35 line clock

* Provide local, diagnostic and remote loop back test

* For E1 interface, 75 ohm (unbalanced) and 120 ohm (balanced)

available and auto-negotiation

* For V.35 interface, DCE and DTE mode are optional

* Comprehensive LED indicators on front panel, convenient for the

diagnosis of equipment working state

* -48VDC&220VAC power supply selectable

* 16-slot, elaborate cooling design and two redundant power supply